3M
Search
Shopping Cart

Personal Protective Equipment

1-40 of 884

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. $174.92
    Use with 3M™ Full Facepieces 7000 Series. It permits the wearer to use corrective lenses and to make position adjustment that is most comfortable.
  2. $117.72
    Use with 3M™ Full Facepiece Respirators 6000 Series. It permits the wearer to use his/her corrective lenses and to make position adjustment that is most comfortable.
  3. $80.00
    This disposable R95 particulate respirator helps provide reliable respiratory protection against certain oil and non-oil based particles. Constructed with a carbon filter layer for nuisance levels of acid gases*.
  4. $80.20
    This disposable R95 particulate respirator helps provide reliable respiratory protection against certain oil and non-oil based particles. Constructed with a carbon filter layer for nuisance levels of organic vapors*.
  5. $35.00
    This economical R95 disposable particulate respirator is designed to help provide comfortable, reliable worker respiratory protection against certain oil and non-oil based particles.
  6. $58.85
    Use as a replacement part for the3M™ Drop Down Half Facepieces 6000 Series.
  7. $127.62
    Use with 3M™ Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403. It permits the wearer to use corrective lenses and to make position adjustment that is most comfortable.
  8. $28.76
    Nylon frame. Vented air seal designed to help minimize fogging. Elastic headband for comfortable secure fit. Polycarbonate anti-fog lenses absorbs 99.9% UV. Meets the High Impact requirements of ANSI Z87.1-2003.
  9. $28.76
    Nylon frame. Vented air seal designed to help minimize fogging. Elastic headband for comfortable secure fit. Polycarbonate anti-fog lenses absorbs 99.9% UV. Meets the High Impact Requirements of ANSI Z87.1-2003.
  10. $26.46
    Easy-opening clips allow goggle attachment to hard hat. Helps keep goggles from being lost, scratched, misplaced. Allows workers to put goggles below brim when in use or slide above brim when not in use. Plastic clips mount quickly with contact adhesive.
  11. $55.83
    Perfected for tactical use, the Maxim 2x2 protective, polycarbonate safety goggle is both stylish and durable eyewear. Featuring nylon frame, vented anti-fog seal and an elastic strap for a secure fit, it offers visual comfort, clarity and protection. The preferred solution for professionals in combat support situations. The lightweight air seal goggle was crafted to help protect from sun, wind, dust and flying debris, while incorporating top and bottom venting to help reduce fog and heat. Its dual-lens design enhances sightline and field of vision.
  12. $12.21
    Lightweight, contoured, low profile design. Three lens angle adjustments for custom fit. Vent channels at top and bottom designed to help minimize fogging. DX™ coating resists fogging, scratching, static and many chemicals. Meets the requirements of CSA Z94.3-2007 and the High Impact Requirements of ANSI Z87.1-2003.
  13. $12.21
    Lightweight, contoured, low profile design. Three lens angle adjustments for custom fit. Vent channels at top and bottom designed to help minimize fogging. DX™ coating resists fogging, scratching, static and many chemicals.Meets the requirements of CSA Z94.3-2007 and the High Impact Requirements of ANSI Z87.1-2003.
  14. $6.12
    The Centurion vented safety impact goggle is reliable protective eyewear, featuring a wide-angle wraparound frame design with distinct "side-to-side" peripheral vision and a large lens opening to accommodate most prescription and safety eyewear.
  15. $7.89
    Wide-angle wraparound design offers exceptional side-to-side peripheral vision. Large lens opening to accommodate prescription and safety eyewear. Wide nasal flare. Vertical, indirect-venting system to minimize fogging. Polycarbonate lens absorbs 99.9% UV. Meets the requirements of CSA Z94.3-2007 and the High Impact Requirements of ANSI Z87.1-2003.
  16. $7.06
    The sturdy Centurion safety splash goggle with indirect venting is reliable protective eyewear, featuring a high wrap for wider viewing area and a large polycarbonate lens opening to accommodate prescription and safety eyewear.
  17. $8.41
    High wrap offers additional coverage. Large lens opening to accommodate prescription and safety eyewear. Wide nasal flare. Vertical, indirect-venting system designed to minimize fogging. Polycarbonate lens absorbs 99.9% UV. Meets the requirements of CSA Z94.3-2007 and the High Impact Requirements of ANSI Z87.1-2003.
  18. $20.23
    Modul-R protective splash safety goggles offer a wider viewing area, strong polycarbonate lens construction and a flexible strap to provide full profile protection. Splash shield has an adjustable venting system to minimize fog.
  19. $2.60
    One of the most economical goggle options available. Fits over most prescription eyewear. Indirect-venting system designed to circulate air and help minimize fogging while keeping liquids out. Polycarbonate lens absorbs 99.9% UV. Meets the High Impact Requirements of ANSI Z87.1-2003.
  20. $3.74
    These safety splash goggles are a dependable and economical choice that offer a sturdy polycarbonate lens, adjustable elastic strap and a wide opening to fit over most prescription eyewear. It is built with an indirect venting system that circulates air and helps minimize fogging, allowing for use in varied environments and conditions.
  21. $16.51
    Sleek, low profile design. Wide wraparound lens design offers exceptional peripheral vision. Soft polymeric inner seal for enhanced comfort. Indirect ventilation designed for improved air flow and to help reduce fogging. Adjustable headband. DX™ anti-fog hard coat protects lens from fog, scratching, and many chemicals. Polycarbonate lens absorbs 99.9% UV. Meets the High Impact requirements of ANSI Z87.1-2003.
  22. $14.30
    Three position adjustable lens angle for optimum fit and sightline. Adjustable temple lengths. Soft, elastomeric browguard cushions contact with the face. Soft, flexible nose bridge pivots to fit comfortably on the face. Wide frame size fits workers with larger size heads. Ventilation channel designed to help minimize fogging. Lenses of the spectacle and dust goggle versions are interchangeable. Meets the High Impact Requirements of ANSI Z87.1-2003.
  23. $31.70
    This half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.
  24. $160.42
    Is convenient because it can be placed in a location that reminds workers to use proper respiratory protection.
  25. $20.80
    This disposable N95 particulate respirator is a small size version similar to our classic 8210 N95 respirator. It is designed to help provide comfortable, reliable worker respiratory protection against certain non-oil based particles.
  26. $11.23
    This disposable P100 particulate respirator helps provide comfortable, reliable worker respiratory protection for certain oil and non-oil based particles. Features 3M™ Cool Flow™ Valve, foam faceseal, adjustable straps and individual packaging.
  27. $29.20
    Is a breakthrough in comfort and convenience. This three-panel respirator with innovative design is uniquely designed to help provide comfortable, reliable worker protection against non-oil based particles.
  28. $25.70
    This disposable N95 particulate flatfold respirator features soft inner material and 3M™ Cool Flow™ Valve to help provide comfortable, reliable worker respiratory protection. Ideally suited for hot/dusty work settings that require long periods of wear.
  29. $287.64
    3M™ Gripping Material Work Glove WGS is a size small and features grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  30. $31.96
    3M™ Gripping Material Work Glove WGS is a size small and features grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  31. $287.64
    3M™ Gripping Material Work Glove WGM is a size medium and features grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  32. $31.96
    3M™ Gripping Material Work Glove WGM is a size medium and features grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  33. $287.64
    3M™ Gripping Material Work Glove WGL is a size large and features a grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  34. $31.96
    3M™ Gripping Material Work Glove WGL is a size large and features a grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  35. $287.64
    3M™ Gripping Material Work Glove WGXL is a size extra large and features grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  36. $31.96
    3M™ Gripping Material Work Glove WGXL is a size extra large and features grey and black synthetic suede leather with 3M™ Gripping Material GM110 sewn into the palm and fingers of the glove.
  37. $23.76
    Protective covers for the Snapcap and Hardcap faceshields.
  38. $11.54
    Replacement part for either 3M™ Nose Cup Assembly 7881S or 3M™ Nose Cup Assembly 7981S, Small.
  39. $20.71
    Use with 3M™ Full Facepieces 6000 and 7000 Series to allow facepiece to be suspended from neck when not in use.
  40. $64.40
    Replacement part for 3M™ Full Facepieces 7000 Series. Use to attach 3M™ Lens 7884 to facepiece. Does not include lens.

1-40 of 884

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5