3M
Search
Shopping Cart

Finishing

1-40 of 43

Page:
  1. 1
  2. 2
  1. $45.00
    Precision, micron-graded, resin-bonded, polyester film backing. Aggressive cut with uniform finish. Anti-loading Fre-Cut™ coating provides greater efficiency and longer product life. Use on plastic, fiberglass, wood, metal, solid-surface composites.
  2. $90.91
    Fast cutting abrasive for precise, uniform, close-tolerance finish. High-strength polyester film backing resin-bonded for durability. For metal, plastic, paint spot repair, automotive power train components, roll superfinishing.
  3. $45.00
    Precision, micron-graded, resin-bonded, polyester film backing. Aggressive cut with uniform finish. Anti-loading Fre-Cut™ coating provides greater efficiency and longer product life. Use on plastic, fiberglass, wood, metal, solid-surface composites.
  4. $854.24
    Fast cutting abrasive for precise, uniform, close-tolerance finish. High-strength polyester film backing aluminum oxide resin-bonded to a 3 mil polyester film backing for durability. Easy to re-use. Use wet or dry for finishing a wide assortment of workpieces.
  5. Starting at: $83.80

    Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
  6. Starting at: $153.10

    Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pads 05546, 05556 or 05576.
  7. Starting at: $45.05

    A reattacheable abrasive disc used for color sanding, paint finishing and blend panel prep.
  8. Starting at: $52.46

    Reattacheable abrasive disc designed for use in sanding before painting, as well as to remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding.
  9. Starting at: $102.29

    Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pad (part number 05551) and interface pad (part number 05777).
  10. Starting at: $94.39

    Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pad (part number 05551) and interface pad (part number 05777).
  11. Starting at: $81.84

    Use for scuffing the blend area prior to painting. Remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding. Suggested backup pad 05858 and Interface Pad 20278
  12. Starting at: $111.82

    6 or 7 holes for dust free sanding. Use with recommended disc pad PN 05865.
  13. $594.00
    Tough, tight, and dense web for long life and durability. Excellent for aggressive blending and finishing. May be used on bench motor or straight shaft tool. Abrasive mineral: Very fine grade aluminum oxide.
  14. $512.00
    Tough, tight, and dense web for long life and durability. Excellent for aggressive blending and finishing. May be used on bench motor or straight shaft tool. Abrasive mineral: Very fine grade aluminum oxide.
  15. Starting at: $82.73

    Precision, micron-graded, resin-bonded, polyester film backing. Aggressive cut with uniform finish. Anti-loading Fre-Cut™ coating provides greater efficiency and longer product life. Use on plastic, fiberglass, wood, metal, solid-surface composites.
  16. Starting at: $33.50

    Precision, micron-graded, resin-bonded, polyester film backing. Aggressive cut with uniform finish. Anti-loading Fre-Cut™ coating provides greater efficiency and longer product life. Use on plastic, fiberglass, wood, metal, solid-surface composites.
  17. Starting at: $21.00

    Fast cutting abrasive for precise, uniform, close-tolerance finish. High-strength polyester film backing resin-bonded for durability. For metal, plastic, paint spot repair, automotive power train components, roll superfinishing.
  18. Starting at: $44.00

    Precision, micron-graded, resin-bonded, polyester film backing. Aggressive cut with uniform finish. Anti-loading Fre-Cut™ coating provides greater efficiency and longer product life. Use on plastic, fiberglass, wood, metal, solid-surface composites.
  19. Starting at: $315.00

    Durable, tough disc excellent for conformable blending, deburring, satin finishing, and cleaning. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Purple.
  20. $463.50
    Tough, tight, and dense web for long life and durability. Excellent for aggressive blending and finishing. May be used on bench motor or straight shaft tool. Abrasive mineral: Very fine grade aluminum oxide.
  21. $594.00
    Tough, tight, and dense web for long life and durability. Excellent for aggressive blending and finishing. May be used on bench motor or straight shaft tool. Abrasive mineral: Very fine grade aluminum oxide.
  22. $534.00
    Tough, tight, and dense web for long life and durability. Excellent for aggressive blending and finishing. May be used on bench motor or straight shaft tool. Abrasive mineral: Very fine grade aluminum oxide.
  23. Starting at: $102.05

    Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pads PN 05756 or PN 05776.
  24. Starting at: $35.52

    Use for fine featheredging or last final sanding step before priming. Suggested backup pad 3M™ Hookit™ Disc Pad, 3 in (PN 05769) with the 3M™ Hookit™ Soft Interface Disc Pad, 3 in (PN 05771).
  25. Starting at: $180.91

    Use for scuffing the blend area prior to painting. Suggested backup pad 05776 and Interface pad 05774.
  26. $50.54
    Use for scuffing the blend area prior to painting. Suggested backup pad 05776 and 05777 interface pad
  27. $55.94
    7 Holes for dust free sanding. Use for scuffing the blend area prior to painting. Suggested backup pad 05865 and 05777 interface pad
  28. $55.94
    7 Holes for dust free sanding. Use for scuffing the blend area prior to painting. Suggested backup pad 05865 and 05777 interface pad
  29. $39.70
    Abrasive disc designed for use in sanding before painting, as well as to remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding.
  30. $39.70
    Abrasive disc designed for use in sanding before painting, as well as to remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding.
  31. $8.99
    Structured abrasives features an engineered surface of microscopic three-dimensional structures resembling pyramids. This precise and consistent abrasive surface is ideal for stainless steel applications requiring a fine finish
  32. $13.99
    Great for gasket removing, disc brake finishing and metal polishing.
  33. $163.49
    5 holes for dust-free sanding. Use for scuffing the blend area prior to painting. Suggested backup pad 05855 and 05773 interface pad.
  34. $410.60
    Available in 1 3/8 inch discs micro graded 1500 only. Scalloped to eliminate edge cutting.
  35. $98.80
    Delivers high cut, long life and better finish. Used on aluminum, stainless steel, plastics, wood and fiberglass to finish, paint prep, surface blending. Hookit™ reinforces discs. Aluminum oxide mineral very fine. Color: maroon MOS:12000 RPM
  36. $132.00
    Delivers high cut, long life and better finish. Used on aluminum, stainless steel, plastics, wood and fiberglass to finish, paint prep, surface blending. Hookit™ reinforces discs. Aluminum oxide mineral very fine. Color: maroon MOS:10000 RPM
  37. $88.80
    Used on rotating power tools, effective for light to moderate cleaning, satin finishing, scratch blending and deburring. Hookit™ backing reinforces disc for longer life. Silicon carbide mineral ultra fine grade. Color: grey MOS: 12,000 RPM
  38. $118.40
    Used on rotating power tools, effective for light to moderate cleaning, satin finishing, scratch blending and deburring. Hookit™ backing reinforces disc for longer life. Silicon carbide mineral ultra fine grade. Color: grey MOS: 10,000 RPM
  39. $108.50
    Delivers high cut, long life and better finish. Used on aluminum, stainless steel, plastics, wood and fiberglass to finish, paint prep, surface blending. Hookit II™ reinforces discs. Aluminum oxide mineral very fine. Color: maroon MOS:2800 RPM
  40. Starting at: $198.98

    7 Holes for dust free sanding. Levels orange peel, dust nibs, paint runs in refinish paint. Recommended disc pad PN 05865 with soft interface pad PN 05777.

1-40 of 43

Page:
  1. 1
  2. 2