3M
Search
Shopping Cart

Discs

81-120 of 793

  1. $272.00
    A coarse, tough, aggressive non-woven disc for heavy duty deburring and finishing. An attachment system presses into the disc holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown/Blue MOS: 25000 RPM
  2. $258.00
    A coarse, tough, aggressive non-woven disc for heavy duty deburring and finishing. An attachment system presses into the disc holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown/Blue MOS: 18000 RPM
  3. $273.25
    Introductory pack containing 4 in disc constructed of heavy duty, semi-open web used to clean rust and paint. Has a backing that mounts to hook and loop pads. Includes a 914 disc pad holder. MOS: 13000 RPM.
  4. $600.60
    Convenient introductory pack containing a variety of 2 inch Roloc™ discs, unitized wheels and bristle discs. Includes disc pad holder.
  5. $615.40
    Convenient introductory pack containing a variety of grades of Roloc™ Bristle Discs 3 inch diameter x 5/8 inch trim. Also includes a disc pad holder.
  6. $117.80
    Aggressively removes paint and rust from seams, door jambs, drip moldings, pinch welds and other difficult-to-reach areas. 3-dimensional abrasive web conforms to work area. Safer than wire bristle tools.
  7. $98.80
    Delivers high cut, long life and better finish. Used on aluminum, stainless steel, plastics, wood and fiberglass to finish, paint prep, surface blending. Hookit™ reinforces discs. Aluminum oxide mineral very fine. Color: maroon MOS:12000 RPM
  8. $132.00
    Delivers high cut, long life and better finish. Used on aluminum, stainless steel, plastics, wood and fiberglass to finish, paint prep, surface blending. Hookit™ reinforces discs. Aluminum oxide mineral very fine. Color: maroon MOS:10000 RPM
  9. $88.80
    Used on rotating power tools, effective for light to moderate cleaning, satin finishing, scratch blending and deburring. Hookit™ backing reinforces disc for longer life. Silicon carbide mineral ultra fine grade. Color: grey MOS: 12,000 RPM
  10. $118.40
    Used on rotating power tools, effective for light to moderate cleaning, satin finishing, scratch blending and deburring. Hookit™ backing reinforces disc for longer life. Silicon carbide mineral ultra fine grade. Color: grey MOS: 10,000 RPM
  11. $327.60
    Durable, rigid, long lasting. Aggressive, open-web disc for cleaning welds, removing rust and paint. Roloc™ TR attachment system. Mineral: Silicon Carbide Extra Coarse Color: Purple* MOS: 15,000 rpm
  12. $182.40
    These plastic abrasive particle-filled products remove 1/16 in or less of sealants, silicones, RTVs and adhesives from most surfaces but not the underlying paint or other coating. That means less time for rework.
  13. $196.80
    These plastic abrasive particle-filled products remove 1/16 in or less of sealants, silicones, RTVs and adhesives from most surfaces but not the underlying paint or other coating. That means less time for rework.
  14. $43.10
    Durable, rigid, long lasting. Aggressive, open-web disc for cleaning welds, removing rust and paint. Roloc™ TR attachment system. Mineral: Silicon Carbide Extra Coarse Color: Purple* MOS: 18,000 rpm
  15. $123.90
    Durable rigid and long lasting, this aggressive, open-web disc is ideal for cleaning welds, removing rust and paint. The TN quick-change system simplifies attachment to and removal from the tool. Color: purple MOS: 13,300 RPM
  16. $77.95
    Durable rigid and long lasting, this aggressive, open-web disc is ideal for cleaning welds, removing rust and paint. The TN quick-change system simplifies attachment to and removal from the tool. Color: purple MOS: 8,600 RPM
  17. $108.50
    Delivers high cut, long life and better finish. Used on aluminum, stainless steel, plastics, wood and fiberglass to finish, paint prep, surface blending. Hookit II™ reinforces discs. Aluminum oxide mineral very fine. Color: maroon MOS:2800 RPM
  18. Starting at: $53.90

    Conformable T27 alumina zirconia flap discs provide high cut rates and long life. Constructed on a durable X-weight cloth backing and resin bonded for heat resistance.
  19. $109.25
    Medium rubber backup pad designed to support 3M™ Roloc™ 4 inch diameter abrasive discs. This pad has a 5/8-11INT thread which allows it to be mounted directly to tools with 5/8-11 EXT threaded shafts. Large Hex Nut (11/16 inch hex).
  20. $76.45
    Rubber backup pad designed to support 3M™ Roloc™ 1-1/2 inch diameter abrasive discs. Conveniently mounts directly to tools with 1/4-20 EXT threaded shafts or used with Roloc™ shank to fit collet chuck tools.
  21. Starting at: $56.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  22. Starting at: $53.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  23. Starting at: $56.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  24. Starting at: $61.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  25. Starting at: $144.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  26. Starting at: $83.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  27. Starting at: $49.50

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  28. Starting at: $76.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  29. Starting at: $99.00

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  30. Starting at: $72.50

    3M™ Resinite™ Floor Surfacing Discs are precut. Sharp, fast-cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
  31. Starting at: $64.34

    Tough mineral construction. Tough "E" weight backing. Fast-cutting, long lasting and hook and loop backing.
  32. Starting at: $58.49

    Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pad 05776.
  33. Starting at: $103.30

    Used for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pads 05768 and 05779.
  34. Starting at: $123.86

    8 hole pattern for dust-free sanding. Used for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal.
  35. Starting at: $54.05

    Generally used for hard to reach areas in paint, rust, and weld removal. Handy quick change tool for disc grinding which fits any standard 1/4 in drill or air tool.
  36. Starting at: $59.02

    Generally used for hard to reach areas in paint, rust, and weld removal. Handy quick change tool for disc grinding which fits any standard 1/4 in drill or air tool.
  37. Starting at: $189.20

    Used for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pad PN 35576.
  38. Starting at: $164.38

    Use for stripping paint to metal, shaping and sanding plastic filler.
  39. Starting at: $189.84

    Pre-punched with a standard hole pattern for dust-free sanding. A pressure-sensitive adhesive backing for easy application and removal.
  40. Starting at: $198.98

    7 Holes for dust free sanding. Levels orange peel, dust nibs, paint runs in refinish paint. Recommended disc pad PN 05865 with soft interface pad PN 05777.

81-120 of 793