3M
Search
Shopping Cart

Discs

1-40 of 65

Page:
  1. 1
  2. 2
  1. $196.30
    Dust extraction back up pad (Clean Sanding) constructed on foam material.
  2. $135.60
    For use with 5 in Hookit™ Clean Sanding discs, 5 in. Hookit™ Dust Free Discs, and 5 in Hookit™ Discs.

    Constructed of a soft durable foam. When used with a Clean Sanding Hookit™ Backup Pad it increases conformability allowing the technician to follow contours and get in closer to most edges while maximizing dust extraction. The same increased conformability is obtained when using non vacuum Hookit™ Discs.
  3. $130.60
    Constructed of a soft durable foam. When used with a Clean Sanding Hookit™ Backup Pad it increases conformability allowing the technician to follow contours and get in closer to most edges while maximizing dust extraction.
  4. $152.00
    Constructed of a soft durable foam. When used with a Clean Sanding Hookit™ Backup Pad it increases conformability allowing the technician to follow contours and get in closer to most edges while maximizing dust extraction.
  5. $74.69
    Designed for 6 inch 3M™ Dust Free discs with Hook-it™. Designed for use with 6 hole, 7 hole, or other hole configuration dust free discs.
  6. $8.99
    Structured abrasives features an engineered surface of microscopic three-dimensional structures resembling pyramids. This precise and consistent abrasive surface is ideal for stainless steel applications requiring a fine finish
  7. Starting at: $52.46

    Reattacheable abrasive disc designed for use in sanding before painting, as well as to remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding.
  8. Starting at: $25.61

    A reattacheable abrasive disc used for featheredging, filler shaping, and panel preparation.
  9. Starting at: $29.57

    A reattacheable abrasive disc used for featheredging and putty sanding. 7 Hole construction allows for dust free or non-dust free use.
  10. Starting at: $45.05

    A reattacheable abrasive disc used for color sanding, paint finishing and blend panel prep.
  11. Starting at: $35.28

    Abrasive disc used for paint preparation, primer sanding and fine featheredging.
  12. Starting at: $102.29

    Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pad (part number 05551) and interface pad (part number 05777).
  13. Starting at: $94.39

    Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pad (part number 05551) and interface pad (part number 05777).
  14. Starting at: $50.35

    Disc with precise hole design for improved life and dust extraction. Finest grade available for rough featheredging. 3M's fastest cutting, longest lasting abrasive for saving labor costs and improving quality. Suggested backup pad part number 05855.
  15. Starting at: $44.64

    Disc with precise hole design for improved life and dust extraction. Use for fine featheredging or last final sanding step before priming. 3M's fastest cutting, longest lasting abrasive for saving labor costs and improving quality. Suggested backup pad part number 20427 and part number 05771 soft interface pad.
  16. Starting at: $64.20

    7 holes for dust-free sanding. Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. 3M's fastest cutting, longest lasting abrasive for saving labor costs and improving quality. Suggested backup pads PN 05865, or PN 05551.
  17. Starting at: $58.39

    Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. 3M's fastest cutting, longest lasting abrasive for saving labor costs and improving quality. Suggested backup pads PN 05776 or PN 05865
  18. Starting at: $127.78

    Cubitron™ Hookit™ Abrasive Grain product constructed on an E weight heavy paper backing. Resin bonded for heat resistance. Primary markets: metalworking, woodworking.
  19. Starting at: $44.04

    Cubitron™ Hookit™ Abrasive Grain product constructed on an E weight heavy paper backing. Resin bonded for heat resistance. Primary markets: metalworking, woodworking.
  20. Starting at: $50.00

    An abrasive disc used for featheredge sanding and sanding for topcoat preparation.
  21. Starting at: $5.49

    Adhesive backed sanding discs makes sanding easy and convenient; just press the disc on the pad and sand. The disc peels off easily when the job is done. Long-lasting tough mineral resists loading. 4 discs per pack, 40 packs per case.
  22. Starting at: $6.99

    Used for featheredging or last final sanding step before priming. Suggested backup Part No. 35576.
  23. Starting at: $19.00

    A premium aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C Weight, paper backing. Primary markets: aerospace, marine, metalworking, woodworking.
  24. Starting at: $41.50

    A premium aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C Weight, paper backing. Primary markets: aerospace, marine, metalworking, woodworking.
  25. Starting at: $35.00

    A premium aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C Weight, paper backing. Primary markets: marine, metalworking, woodworking.
  26. Starting at: $12.95

    An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C Weight, intermediate paper backing. Primary markets: aerospace, marine, metalworking, woodworking.
  27. Starting at: $66.20

    This hook saver is used to protect the hooks on a new Hookit™ Disc Pad. Allows an inexpensive attachment device to be consumed in the application in place of a more expensive disc pad.
  28. Starting at: $217.50

    A ceramic abrasive grain Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. Features an anti-loading stearate coating.
  29. Starting at: $175.00

    A ceramic abrasive grain Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. Features an anti-loading stearate coating.
  30. Starting at: $92.00

    An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: marine and AOEM primer sanding. MOS: 12,000 RPM
  31. Starting at: $65.00

    An aluminum oxide, open coat, non-loading Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: marine and metalworking. MOS: 12000 RPM
  32. Starting at: $28.35

    An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. MOS: 10,000 RPM/12,000 OPM. Primary markets: aerospace, marine, metalworking, woodworking.
  33. Starting at: $74.78

    Foam disc used in a spot repair system for removing P1200-P1500 grade sand scratches prior to using 3M™ Perfect-It™ 3000 Panel Repair System. When work on contour surface, use interface pad Part Number 05777.
  34. Starting at: $50.71

    Incorporates Trizact™ technology for uniform and consistent finish. Use damp to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad PN05551 and PN05777 soft interface pad.
  35. Starting at: $18.50

    An aluminum oxide Hookit™ II disc constructed on a C weight, intermediate paper backing. Grade: P240. Primary markets: metalworking, woodworking.
  36. Starting at: $111.82

    6 or 7 holes for dust free sanding. Use with recommended disc pad PN 05865.
  37. $39.70
    Abrasive disc designed for use in sanding before painting, as well as to remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding.
  38. $47.47
    Dust Free painter's backup pad with Hookit™ Attachment.
  39. $62.69
    Use for scuffing prep area prior to blend work. Use with disc pads PN 05546, PN 05556, or PN 05576.
  40. $62.69
    Use for scuffing prep area prior to blend work. Use with disc pads PN 05546, PN 05556, or PN 05576.

1-40 of 65

Page:
  1. 1
  2. 2