Shop3M > Shop by Product Category > Safety > Respiratory Protection > 3M™ Reusable Respirators > Filters and Cartridges for Reusable Facepiece Respirators > 3M™ Hydrogen Fluoride Cartridge/Filter 7093C/37173(AAD), P100 Respiratory Protection, with Nuisance Level Organic Vapor and Acid Gas Relief*
3M™ Hydrogen Fluoride Cartridge/Filter 7093C/37173(AAD), P100 Respiratory Protection, with Nuisance Level Organic Vapor and Acid Gas Relief*
UPC# 50 051131 37173 1 3M ID 70071401262
 | Description This cartridge/ filter is NIOSH approved and provides the highest level of protection against oil and non-oil based particles. Use with 3M™ Half and Full Facepiece Respirators 6000 Series, Half Facepiece Respirator 7500 Series and Full Facepiece Respirator 7800 Series with bayonet filter holders. Description This cartridge/ filter is NIOSH approved and provides the highest level of protection against oil and non-oil based particles. Use with 3M™ Half and Full Facepiece Respirators 6000 Series, Half Facepiece Respirator 7500 Series and Full Facepiece Respirator 7800 Series with bayonet filter holders. |
Need Help?
| When properly fitted, use in a variety of applications including welding, brazing torch cutting, metal pouring, soldering and exposure to lead, asbestos, cadmium, arsenic, MDA and HF for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. This filter also provides nuisance level* protection against OV and AG exposures. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).
*3M recommended for relief against nuisance levels of organic vapor and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH-approved for organic vapors or acid gases. Do not use for respiratory protection against organic vapors or acid gases (except hydrogen fluoride). 3M personal protective equipment sold through Shop3M.com is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety. Product Details
|
Instructions/ManualCartridge Filter 7093C, Hydrogen Fluoride, P100 UserMSDSProduct MSDS |
