3M™ Speedglas™ Helmet Assembly 9000HWR-FV, Welding Safety 15-1699-35
Features and Benefits:
- Spring-mounted filter assembly
- 4.75" x 3.60" Clear faceshield
- ADF Not Included
Complete helmet assembly (except for auto-darkening filter). The 3M™ Speedglas™ Helmet 9000HWR-FV (FlexView) connects to 3M™ Adflo™ Powered Air Purifying Respirator (PAPR).
Large 4.75 in x 3.6 in (120 mm x 90 mm) clear polycarbonate faceshield for precision weld prep under a variety of lighting conditions. User simply lifts up the spring-mounted filter assembly for weld prep. Important Note: impact resistant, primary eye protection, spectacles or goggles that meet current ANSI specifications, must be worn at all times when using any welding helmet. Accepts all 3M™ Speedglas™ Auto-Darkening Filters Utility and 9000 Series.
3M personal protective equipment sold through Shop3M.com is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety.