3M
Search
Shopping Cart

3M™ Black Super Weatherstrip and Gasket Adhesive, 08008, 5 oz

3M™ Black Super Weatherstrip and Gasket Adhesive, 08008, 5 oz
UPC#: 0-51135-08008-53M ID: 60455055602
$13.31
Tube
Product Details

Benefits

  • Fast drying, strong, flexible, rubbery adhesive
  • Withstands vibration & extreme temperature variation
  • Good oil and water resistance
  • Black color designed to match vehicle weatherstrip for virtually invisible repair

Description

A strong, flexible, rubbery adhesive that can withstand vibration and extreme temperature variations. It can be used to bond automotive weatherstripping and is a great adhesive for holding paper, cork, or rubber gaskets in place during installation.

Extended Description

3M ™ Super Weatherstrip Adhesive is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. Features:High StrengthFlexibleAdhesion To Many SubstratesFast DryingGood Oil and Water ResistanceHigh Temperature ResistanceTypical Physical Properties:Container: 5 oz. TubeBase: Neoprene RubberDensity in lbs/Gallon: (Appx.) 7.6Color: Black Flash Point: -14?F Viscosity (CPS):Brookfield Viscometer 4,500 CPSSolids Content: (Appx.) 39.0%Consistency: Heavy LiquidService Temperature: -20 to -300?FDirections for Use:Thoroughly clean surfaces to be bonded. Wiping with 3M™ General Purpose Adhesive Cleaner (P.N. 08984 or P.N. 08987) will aid in removing oil and dirt. Apply a thin, uniform coat of adhesive on each surface. Allow adhesive to dry until tacky but will not transfer to your knuckle when touched (maximum dry time about 4 minutes). Assemble materials with sufficient pressure to ensure contact. Greater initial strength may be obtained by reactivating. To reactivate, coat both surfaces with adhesive and allow to dry tack free. Lightly coat surface with at thin coat of adhesive or lightly wipe with 3M™ General Purpose Adhesive Cleaner (P.N. 08984). Complete bond within 30 seconds.Applications:Weatherstripping and Gasketing Adhesive.Cloth and supported vinyl bonding.General rubber bonding.Good adhesion to wood, metals, painted surfaces and some plastics.Storage and Handling:Store at room temperature. Rotate stock on a ""first-in-first-out"" basis. When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months.Precautionary Information:Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product."

Specifications
Container Type Tube
Container Volume 5 Fluid Ounce (US)
Reviews
3M™ Black Super Weatherstrip and Gasket Adhesive, 08008, 5 oz is rated 3.5 out of 5 by 2.
Rated 5 out of 5 by from Perfect for Resealing Weatherstrip I purchased this to seal up the weatherstrip on the rear window of my Wrangler that had delaminated over time. Followed the directions and it works great and will not leak. Bonds completely to the hard-top and the weatherstrip which won't allow water to pass through. Just wish the OEM stuff was this good and I wouldn't have had to replace it!
Date published: 2014-08-02
Rated 2 out of 5 by from 74 Corvette door seals I used the Super Weather Stripping adhesive to attach rubber weather stripping to the doors of my 74 Corvette. I followed the directions exactly. Cleaned used an adhesive remover to get rid of any old residue, laid a lite bead on the surfaces to be connected and allowed it to dry until it skinned over. I then placed the weather strip in the location it was needed and used small clamps to hold it in place for an hour. This morning I went in the shop to check it and it had all delaminated from the rubber weather strip. I'm not sure if it is temperature dependent, only acceptable for certain materials or if I just applied it wrong. None of that is on the tube. So now I have to scrape all the old adhesive off the door, clean off remaining residue and find an adhesive that will work so I don't go through 5 hours of work for nothing!!
Date published: 2013-02-10
Documents